Standard Products

2.8in Touch Module for use with Microchip Xplained kits or custom hosts with the necessary interfaces and I/O to communicate with the touch controller and display hardware.
This module is part of the Microchip mXT143E Xplained kit.

• 1.2mm soda lime cover panel
• mXT143E Touch Controller
• 2.8in TFT 240x320 LCD
• ILI9341 display driver, SPI + parallel
• molded plastic frame
• Xplained Pro "XPRO LCD" interface FFC connector

TM2800 Datasheet

Demo HEX Files for XMEGA-A3BU and SAM4S Xplained MCU boards. Source available from the Atmel Software Framework.

2.8in Touch Module with ATXMEGA256A3BU on-board, a stand-alone version of the TM2800 module. It consolidates the functionality of the XMEGA-A3BU Xplained and mXT143E Xplained kits into a single, stand-alone kit. The internal flash memory of the MCU offers the use-case of a "UI controller" which can be added to an existing design.

• 1.2mm soda lime cover panel
• mXT143E Touch Controller
• 2.8in TFT 240x320 LCD
• ILI9341 display driver, SPI
• XMEGA256A3BU Host MCU
• molded plastic frame

TM2801 Datasheet

TM2801 ASF Multitouch Demo -  Example TM2801 project based on the ASF MultiTouch Demo. This project consists of the mXT143E Xplained / XMEGA-A3BU Xplained MultiTouch demo example project with some minor tweaks to target the TM2801 hardware instead of the TM2800.

3.5in Touch Module with Xplained Pro FFC and Extension header for use with Microchip Xplained and Curiosity evaluation kits. This is the Microchip maXTouch Curiosity Pro Board.

• 1.1mm soda lime cover panel
• mXT336U Touch Controller
• 3.5in TFT 480x320 LCD
• ILI9488 display driver, 8-bit MCU interface
• Xplained Pro "XPRO LCD" interface FFC connector
• Xplained Pro "XPRO EXT" interface header connector

TM3500B Quick Start

TM3500B (mXT Curiosity Pro) User Guide (Microchip)

3.5in Touch Module well-suited for smaller designs with low-to-moderate user-interface requirements.  

• 1.1mm soda lime cover panel
• mXT112S Touch Controller
• 3.5in TFT 480x320 LCD
• ILI9488 display driver, 8-bit MCU interface
• Xplained Pro "XPRO LCD" interface FFC connector

Datasheet

4.3in touch sensor targeting mid-size user-interface requirements. Suitable for use with Xplained and Curiosity eval kits. This is the Microchip High-Performance 4.3" WQVGA Display Module

• 2mm soda lime cover panel
• mXT336T Touch Controller
• 4.3in TFT 480x272 LCD
• HX8527-A display driver, 24-bit RGB interface
• 4 Capacitive Nav Keys
• Xplained Pro "XPRO LCD" interface FFC connector
• Supports MEB adapter for use w/ PIC32MZ MEB II kit

Datasheet

5in touch sensor targeting mid-size user-interface requirements. Suitable for use with Xplained and Curiosity eval kits. This is the Microchip High-Performance WVGA Display Module

• 1.1mm soda lime cover panel
• mXT640T Touch Controller
• 5in TFT 800x480 LCD
• 24-bit RGB interface
• 4 Capacitive Nav Keys
• Xplained Pro "XPRO LCD" interface FFC connector
• Supports MEB adapter for use w/ PIC32MZ MEB II kit

Datasheet

7in touch sensor targeting larger user-interface requirements. Suitable for use with Xplained eval kits.

• 1.1mm Dragontrail™ cover panel
• mXT640T Touch Controller
• 7in TFT 800x480 LCD
• 18-bit RGB interface
• 4 Capacitive Nav Keys
• Xplained Pro "XPRO LCD" interface FFC connector

Datasheet